Australia compliance guides
Practical Australian WHS compliance guides covering SWMS, high-risk work, heavy-vehicle chain-of-responsibility and contractor safety evidence.
Heavy Vehicle Compliance Software
- Chain of Responsibility Role Matrix for Transport Clients — Map the heavy-vehicle transport functions your business actually performs, then link each function to risk controls and a named decision owner.
- Chain of Responsibility Loading Change Communication — Communicate changes to a heavy-vehicle load, packaging or restraint plan across parties before dispatch and preserve the decision trail.
- Driver Fitness-for-Duty Record Governance in Australia — Set a defensible heavy-vehicle fitness-for-duty decision trail while protecting sensitive driver health information and separating it from work-rest records.
- Heavy-Vehicle Defect Close-Out Evidence in Australia — Connect a heavy-vehicle defect report to repair, inspection, clearance where required and the decision to return the vehicle to service.
- Investigating Heavy-Vehicle Fatigue Exceptions in Australia — Investigate a fatigue exception beyond the work diary: preserve the event, protect the driver and identify scheduling or loading causes.
- Heavy-Vehicle Maintenance Contractor Oversight — Oversee outsourced heavy-vehicle maintenance through scope, defects, repair evidence and release decisions.
- Load Restraint Incident Evidence for Australian Fleets — Preserve the load plan, vehicle, equipment and decisions after a heavy-vehicle restraint failure so the right parties can investigate and control recurrence.
Whs Compliance Software
- Confined Space Entry Permit Handover in Australia — Hand over a confined-space entry permit with the correct people, controls, duration and completion check under the applicable Australian WHS rules.
- Contractor Induction Evidence for Australian Sites — Record which contractor workers received the site-specific construction induction, current rules and changed-risk briefings.
- Hazardous Chemical Storage Segregation Inspections — Inspect a hazardous-chemical store for incompatible materials, container condition, spill controls and owned corrective actions.
- Plant Isolation and Maintenance Handover in Australia — Track isolation status, maintenance work and authorised return to service in an Australian plant handover.
- Principal Contractor WHS Plan Handover — Transfer WHS plan control, open risks and contractor communications when project leadership changes.
- Remote Worker WHS Check-In and Escalation in Australia — Design remote-worker check-ins around communication failure, missed contacts and a practical escalation response under applicable Australian WHS rules.
- Review a SWMS After High-Risk Work Changes in Australia — Reassess a safe work method statement when high-risk construction work, controls or site conditions change, then brief the affected crew.
- Verify a SWMS Before High-Risk Work Starts in Australia — Check that the SWMS matches the planned high-risk construction work, site controls, people and equipment before authorising the task to start.
- WHS Consultation Records for Shared Worksites in Australia — Record which duty holders and workers were consulted, what risks they raised, the decisions reached and the actions assigned on a shared worksite.
- WHS Incident Corrective Action Evidence in Australia — Link an incident investigation to owners, changed controls and evidence that corrective actions were completed and reviewed under Australian WHS practice.
- Plant Inspection Failure Escalation in Australia — Escalate a failed workplace plant inspection with isolation, competent assessment, repair evidence and a clear return-to-use decision.
Safety Management Software
- Property Contractor WHS Prequalification in Australia — Assess property contractors' safety evidence against the actual job, state rules and site risks before work begins.
More Australia compliance guides
- Chain of Responsibility obligations: who is responsible for heavy vehicle safety? — Identify your Chain of Responsibility role, understand the HVNL primary duty and put practical controls around heavy vehicle transport risks.
- WHS Act duties explained: who must do what? — Understand who owes duties under Australia's model WHS Act, how duties overlap, what reasonably practicable means and where Victoria's different OHS law applies.
- Childcare compliance checklist Australia: NQF, child safety, staff and CCS — An Australian childcare and OSHC compliance checklist covering NQF approvals, the 2026 child-safety changes, staffing, records, incidents, QIP and CCS.
- Hospitality compliance checklist Australia: food, licences, workers and WHS — Use this Australian hospitality checklist to review food-safety controls, Standard 3.2.2A, allergens, local permissions, RSA where relevant, worker safety and evidence.
- Manufacturing WHS compliance Australia: controls, evidence and review — Build an Australian manufacturing WHS system around plant, maintenance, chemicals, noise, manual tasks and contractor interfaces, with a practical evidence map.
- Chain of Responsibility for executives: the decisions and evidence that matter
- NHVAS accreditation in 2026: what existing operators need to do
- Silica dust control plan in Australia: when it is needed and what to put in it
- WHS notifiable incidents in Australia: what to do and which law applies
- Electrical safety at work in Australia: a practical WHS guide — A practical Australian guide to workplace electrical risk, isolation, equipment checks, competent work and state-specific WHS rules.
- Hazardous chemicals manifest in Australia: when and how to prepare one — Learn when an Australian workplace needs a hazardous chemicals manifest, what it contains, how it differs from a register, and what to verify locally.
- Safe Work Australia codes of practice: how to use them at work — Understand model WHS codes, local approval, legal status and how to turn guidance into practical workplace controls across Australia.
- When does a workplace need a hazardous chemicals manifest? — Learn when Schedule 11 quantities trigger a chemical manifest, how it differs from a register and placards, and what emergency services need.
- Which NSW workers need audiometric testing, and when? — See which NSW workers need employer-funded hearing tests, the three-month baseline and two-year follow-up schedule, and how to act on results.
- When must you notify SafeWork NSW about legacy engineered stone work? — Check when processing installed engineered stone in NSW needs SafeWork notification, what to include, annual and change deadlines, and the control duties that still apply.
- Preserving a NSW notifiable incident site: what can move? — After a notifiable NSW workplace incident, understand who preserves the site, what may be moved for safety or rescue, and how to record the regulator response.
- Which workers must an NSW employer add to the Silica Worker Register? — Check who must be registered with SafeWork NSW's Silica Worker Register, the 28-day deadline, subcontractor responsibility and health-monitoring boundary.
- NSW vs Victoria SWMS requirements: what changes across the border? — Compare NSW and Victoria SWMS duties, current legal frameworks, preparation, consultation, site use, review and retention for high-risk construction work.
- When must a Queensland business provide hazardous-chemical health monitoring? — Understand when Queensland hazardous-chemical health monitoring is required, who pays, when WHSQ receives a report and how long confidential records are kept.
- Queensland HSR elections: work groups, records and training — Follow Queensland's HSR election process: worker notice, work groups, 14-day negotiations, election, regulator list and five-day training within 28 days.
- Can you repair or reinstall existing engineered stone in Queensland? — Check Queensland's legacy engineered-stone repair, removal and notification rules, plus the time-limited exemption for reinstalling a temporarily removed benchtop.
- How do you register and renew plant items in Queensland? — Check which plant items need Queensland registration, who applies, how annual renewal works and which inspection and certificate records must stay current.
- How often must electrical equipment be tested and tagged in Queensland? — Choose the right Queensland electrical equipment and safety-switch test intervals for construction, manufacturing, offices and hire equipment under the 2026 Regulation.
- When can Queensland asbestos removal start without five days' notice? — Know when Queensland licensed removal needs five days' notice, when urgent work calls for immediate WHSQ contact, and how the severe-weather exemption applies.
- What does a Queensland work health and safety officer do? — Understand Queensland's work health and safety officer role, who may be appointed, its 12-month risk assessment report and how it differs from an HSR.
- What workplace incidents must be reported to SafeWork SA? — Find out what South Australian PCBUs must report to SafeWork SA, which notification channel to use, what evidence to prepare and when to preserve the site.
- When must South Australian businesses notify lead risk work? — Check when lead processes become lead risk work in South Australia, how to notify SafeWork SA, and what health monitoring and worker-removal steps follow.
- When must an altered plant design be registered in Victoria? — Check when a changed plant design needs Victorian registration, what verification evidence to gather, and how interstate recognition differs for amusement structures.
- How do you report a notifiable incident to WorkSafe Victoria? — Follow WorkSafe Victoria's immediate notification, site-preservation, 48-hour written record and five-year retention process after a serious workplace incident.
- What do Victoria's psychological health regulations require employers to do? — Apply Victoria's 2025 psychological health regulations: identify psychosocial hazards, control work-related risk, consult employees and review controls when required.
- Who must keep an asbestos register at a Victorian workplace? — Learn who maintains a Victorian workplace asbestos register, what it records, the five-year and change-triggered reviews, and how to hand it to contractors.
- When does a Western Australian site need a dangerous goods licence? — Check when a WA dangerous-goods site licence is needed, how manifest quantities and exemptions work, and what risk and emergency evidence an operator should prepare.
- How do you elect and train an HSR in Western Australia? — Follow the WA process for HSR work groups, elections, five-day approved training, records and worker consultation without confusing representation with management control.
- How should WA employers manage psychosocial hazards at work? — A practical Western Australian guide to identifying psychosocial hazards, choosing work-design controls, consulting workers and reviewing effectiveness.