Manufacturing compliance software for Australia
Plant and machinery safety, plant registration, hazardous chemicals and SDS, worker competency, incidents and contractor compliance, in one place, so your factory stays safe and audit-ready.
30 days free · No charge during your trial · Works alongside your ERP and maintenance systems
& people
Plant, chemicals and people, under control
A manufacturing site is a WHS problem of plant, hazardous substances and worker competency. Complys keeps the records, procedures and reminders for all three in one place, so nothing lapses and the site is ready to show.
Plant & machinery safety
Keep machine guarding, isolation and lockout/tagout procedures, pre-start checks and safe operating procedures against each item of plant, so the controls that keep operators safe are documented, followed and evidenced rather than assumed.
Plant registration & maintenance
Track which items of plant require registration with the regulator, their inspection, servicing and maintenance history, and the next due dates, with reminders, so registrable and high-risk plant is never running out of date. Registration requirements apply to specific plant, so check what covers your equipment.
Hazardous chemicals & SDS
Maintain your hazardous chemical register with a current Safety Data Sheet for each chemical, kept accessible and up to date. Where your quantities exceed the thresholds, keep manifest and placarding records too, along with storage, labelling and worker information.
Worker competency & licences
High-risk work licences (forklift, cranes, pressure equipment and more), machine-specific training, inductions and competencies tracked per worker, so only trained, licensed people run the plant, and you can prove it.
Incidents & near misses
Record incidents and near misses, run the investigation, and keep a clear history of what happened and what was done, so learning feeds back into your risks, procedures and plant controls rather than being lost.
Contractor compliance
Contractors doing maintenance, installation or specialist work on your plant need current insurance, licences and competency. Onboard them, verify their cover and track expiry, so only compliant contractors work on your site.
From plant to evidence
Everything connects, so a piece of plant carries its checks, its operators carry their licences, and a near miss becomes an action that lifts your readiness.
Complys also covers your wider WHS compliance, a dedicated chemical register & SDS, plant & equipment register and contractor management.
Manufacturing compliance software, FAQs
What compliance does an Australian manufacturer need?
It varies with what you make and the plant and substances you use, but it typically covers WHS risk management, plant and machinery safety (guarding, isolation, maintenance), plant registration for certain items, hazardous chemical registers and Safety Data Sheets, worker competency and high-risk work licences, incident management and contractor compliance. Complys keeps these records and reminders organised; you should apply the rules that fit your operation and jurisdiction.
Does it track plant registration and maintenance?
Yes. Complys tracks which plant requires registration, and keeps inspection, servicing and maintenance records against each item with next-due reminders. Registration requirements apply to specific classes of plant, so check what applies to your equipment.
Can it manage hazardous chemicals and SDS?
Yes. Complys keeps a hazardous chemical register with the current Safety Data Sheet for each chemical, accessible and up to date, and where your quantities exceed the thresholds it can hold manifest and placarding records alongside storage and worker-information records.
Does it track high-risk work licences?
Yes. Forklift, crane, pressure-equipment and other high-risk work licences, machine-specific training and competencies are tracked per worker with renewal reminders, so only licensed, trained operators run the plant.
Is this an ERP or production system?
No. Complys is the WHS and compliance layer that sits alongside your ERP, MES and maintenance systems. You keep running production where you do now, and Complys handles plant safety records, chemicals, competency, incidents, contractor compliance and evidence.
Is there a free trial?
Yes, 30 days free, no charge during your trial. You can start adding your plant, chemicals, workers and evidence straight away.
Keep your plant, chemicals and people compliant
Start free for 30 days, no charge during your trial. Add your plant, chemicals, workers and evidence and see your WHS readiness build.
Start your free trialPricing that fits your size
Start with 30 days free. Simple plans for growing businesses, with custom pricing for enterprise deployments. Pay yearly and get 2 months free.
Prices shown in local currency. Every tier includes everything. 30-day free trial · no charge during your trial. Larger organisation? See Trust & Security.
Complys organises and evidences your compliance; it does not register plant or certify your site on your behalf. Plant registration, chemical manifest/placarding thresholds and licensing requirements are set under the WHS laws and can vary by state and territory, check the rules that apply to your operation. Complys is an independent platform and is not affiliated with any regulator.